Fly Ash Dryer

Fly Ash Dryer

Product Price: Rs 40 Lakh / UnitGet Best Price

Fly Ash Dryer We offer our clients a fine and excellent grade Fly ash Dryer, which is used in drying and cooling of materials that flow freely. This product is provided with a rotating shell which is supported on rollers & tires. Our product is available in various configurations. It requires a 5HP 1440 to 85 HP electric motor to work efficiently. Working principle· Firstly, use one belt conveyor or bucket elevator to send the wet silica sand into the drum of Fly Ash Dryer· Conveyed from the feed screw directly into the Fly Ash Rotary Dryer, raised by the drum wall panels repeatedly, and scattered by the crushing blow devices· Materials and the negative high-temp media are combined sufficiently to complete heat and mass transfer process·

Result of the drum wind angle and induced air, feed materials move slowly, and discharged from the spiral after drying, exhaust gas handled by the cyclone, venting to the atmosphere· The dryer adopts the riding wheel device, which makes the riding wheel and the rolling ring linear touch all the time. Thus the abrasive and the power loss are greatly reduced. The granularity and the moisture can be controlled by the customer’s demand. When drying the coal slurry, the product moisture can be less than 5% and the granularity can be less than 6mm. Fly Ash Classifier We offer a wide range of online Fly Ash Classifiers that are capable of grinding with economy, ease and safety.

These are offered with a wide range of particle sizing of any non-abrasive material soft and hard up 80 to 325 mesh, from granular to finest dust. Our range of these online Air Classifiers meets most capacity requirements by grinding, classifying and conveying all in a single unit. With finesse of the finished products ranging from about 80 mesh to bulk passing through 325 mesh, these online Air Classifiers lend themselves to a large degree of adjustment. This operation depends on the particular materials being handled.

Features :

• Particles are reduced to finer and more uniform sizes.
• Use of a cyclone separator leads to less dusting on the output side.
•  No dusting from the feeding hopper because feeding is done under negative pressure.
•  It runs at lower speed, hence it requires much less maintenance.· They are easy to clean & wash.
• It is manually fed as normal practice & can be supplied with automatic feeding as well.
• It uses air classification which does not require a screen. Hence, it is free from problems like conking, Printing & frequent replacement of screen do not arise.

Additional Information:

• Production Capacity: 10 To 15 Ton/H
• Delivery Time: 45 days
• Packaging Details: Client Scope